show edp
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
371
show edp
show edp {ports [all | <ports>] {detail}}
Description
Displays connectivity and configuration information for neighboring Extreme Networks switches.
Syntax Description
Default
N/A.
Usage Guidelines
On a modular switch,
<ports>
can be a list of slots and ports. On a stand-alone switch,
<portlist>
can
be one or more port numbers. For a detailed explanation of port specification, see
“Port Numbering”
in
Chapter 1, “Command Reference Overview.”
To clear the counters, use the
clear lacp counters
command.
The neighbor-ID value is eight bytes. The first two bytes are always set to 00:00; the last six bytes are set
to the neighbor’s system MAC address.
Use the
show edp
command to display neighboring switches and configurations. This is most effective
with Extreme Networks switches.
Example
The following command displays the configuration of the switch:
show edp
Following is sample output from this command:
EDP advert-interval :60 seconds
EDP holddown-interval :180 seconds
EDP enabled on ports :1:1 1:2 1:3 1:4 1:5 1:6 3:1 3:2 3:3 3:4
Following is sample output from the
show edp ports 1:1
command:
Port Neighbor Neighbor-ID
Remote Age Num
Port Vlans
=============================================================================
1:1 Oban 00:00:00:30:48:41:ed:97 1:1 54 1
=============================================================================
ports
Specifies one or more ports or slots and ports.
all
Specifies all ports.
detail
Show detailed information.
