show ports sharing
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
401
show ports sharing
show ports sharing
Description
Displays port load-sharing groups, or link aggregation groups (LAGs).
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Output from this command displays the following information:
●
Config Master—The port that is configured as the master logical port of the link aggregation group
(LAG). This number is also the LAG group ID.
●
Current Master—In LACP, this is the port that is currently the LAG group ID, or master logical port
for the LAG.
●
Agg Control—This is the aggregation control for the specified LAG; it can be either static or LACP.
In LACP, it is the aggregation control for the specified LAG.
●
Ld Share Algorithm—The algorithm used for the link aggregation. The available link aggregation
algorithms vary among platforms; see the
ExtremeWare XOS Concepts Guide
for more information.
●
Ld Share Group—The specific ports that belong to each LAG, or the port numbers in the trunk. A
port can belong to only one LAG, either static or dynamic.
●
Agg Mbr—In LACP, this shows whether the port has been added to the aggregator or not; it will be
either Y for yes or - for no.
●
Link Status—This is the current status of the link
●
Link Up transitions—Number of times the link has cycled through being up, then down, then up.
Example
The following command displays link aggregation on the switch:
show ports sharing
The following is sample output from this command on the Summit X450 series switch:
Load Sharing Monitor
Config Current Agg Ld Share Ld Share Agg Link Link Up
Master Master Control Algorithm Group Mbr Status transitions
==============================================================================
5 5 LACP L2 5 Y A 3
L2 6 Y A 3
