enable icmp port-unreachables
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1379
enable icmp port-unreachables
enable icmp port-unreachables {vlan <name>}
Description
Enables the generation of ICMP port unreachable messages on one or all VLANs.
Syntax Description
Default
Enabled.
Usage Guidelines
Enables the generation of ICMP port unreachable messages (type 3, code 3) when a TCP or UDP request
is made to the switch, and no application is waiting for the request, or access policy denies the request.
If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually
forwarded by the switch is controlled by the access-list commands.
Example
The following command enables ICMP port unreachable messages on VLAN
accounting
:
enable icmp port-unreachables vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
name
Specifies a VLAN name.
