QoS Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
930
Spacebar->Toggle screen 0->Clear counters U->Page up D->Page down ESC->exit
The following command shows the QoS ingress statistics related to the specified ports:
# show port 1:1-1:2 qosmonitor ingress
Following is sample output from this command:
Qos Monitor Req Summary Thu Mar 2 10:59:28 2006
Port IQP1 IQP2 IQP3 IQP4 IQP5 IQP6 IQP7 IQP8
Pkt Pkt Pkt Pkt Pkt Pkt Pkt Pkt
Xmts Xmts Xmts Xmts Xmts Xmts Xmts Xmts
================================================================================
1:1 0 0 0 0 0 0 0 0
1:2 0 0 0 0 0 0 0 0
================================================================================
Spacebar->Toggle screen 0->Clear counters U->Page up D->Page down ESC->exit
History
This command was first available in ExtremeWare XOS 10.1.
The ingress information was added in ExtremeWare XOS 11.0
Also, you must specify the ports in ExtremeWare XOS 11.0.
The egress and no-refresh keywords were added in ExtremeWare 11.3.
The bytes and packets keywords, as well as the toggling functionality, were added in ExtremeWare XOS
11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switch.
