Commands for Status Monitoring and Statistics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
576
configure log filter events match
configure log filter <name> [add | delete] {exclude} events [<event-
condition> | [all | <event-component>] {severity <severity> {only}}] [match
| strict-match] <type> <value>
Description
Configures a log filter to add or delete detailed feature messages based on a specified set of events and
match parameter values.
Syntax Description
Default
If the
exclude
keyword is not used, the events will be included by the filter. If
severity
is not
specified, then the filter will use the component default severity threshold (see the note on
on page 574
when
delete
or
exclude
is specified).
Usage Guidelines
This command controls the incidents that pass a filter by adding, or deleting, a specified set of events
that match a list of
<type> <value>
pairs. This command is an extension of the command
configure
log filter events
, and adds the ability to filter incidents based on matching specified event
parameter values to the event.
See the
configure log filter events
command
on page 573
for more information on specifying and
using filters, on event conditions and components, and on the details of the filtering process. The
discussion here is about the concepts of matching
<type> <value>
pairs to more narrowly define
filters.
name
Specifies the filter to configure.
add
Add the specified events to the filter.
delete
Remove the specified events from the filter.
exclude
Events matching the filter will be excluded.
event-condition
Specifies the event condition.
all
Specifies all events.
event-component
Specifies all the events associated with a particular component.
severity
Specifies the minimum severity level of events (if the keyword only is omitted).
only
Specifies only events of the specified severity level.
match
Specifies events whose parameter values match the <type> <value> pair.
strict-match
Specifies events whose parameter values match the <type> <value> pair, and
possess all the parameters specified.
type
Specifies the type of parameter to match. For more information about types
and values see
“Types and Values” on page 577
.
value
Specifies the value of the parameter to match. For more information about
types and values see
“Types and Values” on page 577
.
