Extreme Networks ExtremeWare XOS 11.5, Справочник по командам

Страница: 1953 / 2024

configure elrp-client one-shot
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1953
configure elrp-client one-shot
configure elrp-client one-shot <vlan_name> ports [<ports> | all] interval
<sec> retry <count> [log | print | print-and-log]
Description
Starts one-time, non-periodic ELRP packet transmission on the specified ports of the VLAN using the
specified count and interval.
Syntax Description
Default
●
sec
—The interval between consecutive packet transmissions is 1 second.
●
count
—The number of times ELRP packets must be transmitted is 3.
Usage Guidelines
This command starts one-time, non-periodic ELRP packet transmission on the specified ports of the
VLAN using the specified count and interval. If any of these transmitted packets is returned, indicating
loopback detection, the ELRP client can perform a configured action such as logging a message in the
system log file or printing a log message to the console. There is no need to send a trap to the SNMP
manager for non-periodic requests.
NOTE
This command is backward compatible with Extreme Networks switches running ExtremeWare. If your network
contains switches running only ExtremeWare XOS, you can also use the
run elrp <vlan_name> {ports
<ports>} {interval <sec>} {retry <count>}
to perform one-time ELRP packet transmission.
vlan_name Specifies a VLAN name.
ports Specifies the set of VLAN ports for packet transmission.
all Specifies all ports of this VLAN for packet transmission.
sec Specifies the interval (in seconds) between consecutive packet transmissions.
The range is 1 to 600 seconds. The default is 1 second.
count Specifies the number of times ELRP packets must be transmitted. The range is
1 to 255 times. The default is 3 times.
log Specifies that a message should be logged in the system log file when ELRP
packets are received back indicating detection of network loop, or no packets
are received within the specified duration.
print Specifies that a message should be printed to the console when ELRP packets
are received back indicating detection of network loop, or no packets are
received within the specified duration.
print-and-log Specifies that a message should be logged in the system log file and printed to
the console when ELRP packets are received back indicating detection of
network loop, or no packets are received within the specified duration.