configure igmp
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1791
configure igmp
configure igmp <query_interval> <query_response_interval>
<last_member_query_interval> {<robustness>}
Description
Configures the Internet Group Management Protocol (IGMP) timers.
Syntax Description
Default
●
query interval—125 seconds
●
query response interval—10 seconds
●
last member query interval—1 second
●
robustness—2
Usage Guidelines
Timers are based on RFC2236. Specify the following:
●
query interval—The amount of time, in seconds, the system waits between sending out general
queries. The range is 1 to 429,496,729 seconds.
●
query response interval—The maximum response time inserted into the periodic general queries.
The range is 1 to 25 seconds.
●
last member query interval—The maximum response time inserted into a group-specific query sent
in response to a leave group message. The range is 1 to 25 seconds.
●
robustness—The degree of robustness of the network. The range is 2 to 7.
Example
The following command configures the IGMP timers:
configure igmp 100 5 1 3
History
This command was first available in ExtremeWare XOS 10.1.
query_interval
Specifies the interval (in seconds) between general queries.
query_response_interval
Specifies the maximum query response time (in seconds).
last_member_query_interval
Specifies the maximum group-specific query response time (in seconds).
robustness
Specifies the degree of robustness for the network.
