Power Over Ethernet Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
530
enable inline-power ports
enable inline-power ports [all | <port_list>]
Description
Enables PoE power currently provided to all ports or to specified ports.
Syntax Description
Default
Enable.
Usage Guidelines
Disabling inline power to a port immediately removes power to any connected PD. By default, inline
power provided to all ports is enabled.
On modular switches, to deliver inline power to ports with connected PDs, you must also reserve
power for the slot with the PDs using the
configure inline-power budget slot
command. If you do not
have enough reserved power for the port, that port moves into a Denied state.
NOTE
On modular switches, if your chassis has an inline power module and there is not enough power to supply a slot,
that slot will not be powered on; the slot will not function in data-only mode without enough power for inline power.
Disabling inline power using the
disable inline-power
command does
not
affect the data traffic
traversing the port. And, disabling the port using the
disable port
command does not affect the inline
power supplied to the port.
Example
The following command enables inline power to ports 4 and 5 on slot 3 on a modular switch:
enable inline-power ports 3:4-5
History
This command was first available in ExtremeWare XOS 11.1.
all
Enables inline power to all ports on the switch.
port_list
Enables inline power to the specified ports.
