enable rip originate-default cost
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1489
enable rip originate-default cost
enable rip originate-default {always} cost <number> {tag<number>}
Description
Configures a default route to be advertised by RIP.
Syntax Description
Default
Disabled.
Usage Guidelines
If
always
is specified, RIP always advertises the default route to its neighbors. If always is not specified,
RIP advertises a default route only if a reachable default route is in the system route table.
The default route advertisement is filtered using the out policy.
The cost metric is inserted for all RIP-learned, static, and direct routes injected into RIP. The tag value is
used only by special routing applications.
Example
The following command configures a default route to be advertised by RIP if there is a default route in
the system routing table:
enable rip originate-default cost 7
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
always
Specifies to always advertise the default route.
cost <number>
Specifies a cost metric. The range is 1 - 15.
tag <number>
Specifies a tag number.
