Extreme Networks ExtremeWare XOS 11.5, Справочник по командам

Страница: 711 / 2024

unconfigure log target format
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
711
unconfigure log target format
unconfigure log target [console | memory-buffer | nvram | session | syslog
[all | <ipaddress> | <ipPort> {vr <vr_name>} [local0 ... local7]]] format
Description
Resets the log target format to its default values.
Syntax Description
Default
When a target format is unconfigured, it is reset to the default values.
The following defaults apply to console display, memory buffer, NVRAM, and session targets:
●
timestamp—hundredths
●
date—mm-dd-yyyy
●
severity—on
●
event-name—condition
●
host-name—off
●
sequence-number—off
●
process-name—off
●
process-slot—on (modular switches only)
●
process-id—off
●
source-line—off
The following defaults apply to syslog targets (per RFC 3164):
●
timestamp—seconds
●
date—mmm-dd
console Specifies the console display format.
memory-buffer Specifies the switch memory buffer format.
nvram Specifies the switch NVRAM format.
session Specifies the current session (including console display) format.
syslog Specifies a syslog target format.
all Specifies all remote syslog servers.
ipaddress Specifies the syslog IP address.
ipPort Specifies the UDP port number for the syslog target.
vr_name Specifies the virtual router that can reach the server IP address.
NOTE: The BlackDiamond 8800 series switch and the Summit X450 family of
switches do not support user-created VRs.
local0 ... local7 Specifies the local syslog facility.
format Specifies that the format for the target will be reset to the default value.