enable ripng triggerupdates
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1527
enable ripng triggerupdates
enable ripng triggerupdates {vlan <vlan-name> | tunnel <tunnel_name> |
[vlan | tunnel] all}
Description
Enables the trigger update mechanism. Triggered updates are a mechanism for immediately notifying a
router’s neighbors when the router adds or deletes routes or changes their metric.
Syntax Description
Default
Enabled.
Usage Guidelines
Triggered updates occur whenever a router changes the metric for a route and it is required to send an
update message immediately, even if it is not yet time for a regular update message to be sent. This will
generally result in faster convergence, but may also result in more RIPng-related traffic.
Example
The following command enables the trigger update mechanism on all IPv6 configured interfaces:
enable ripng triggerupdate
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
vlan-name
Specifies an IPv6 configured VLAN.
tunnel-name
Specifies an IPv6 tunnel.
all
Specifies all interfaces.
