enable clipaging
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
89
enable clipaging
enable clipaging
Description
Enables the pause mechanism and does not allow the display to print continuously to the screen.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
The command line interface (CLI) is designed for use in a VT100 environment. Most
show
command
output will pause when the display reaches the end of a page.
To view the status of CLI paging on the switch, use the
show management
command. The
show
management
command displays information about the switch including the enable/disable state for CLI
paging.
If CLI paging is enabled and you use the
show tech
command to diagnose system technical problems,
the CLI paging feature is disabled.
CLI paging is only active on a per-shell session basis. In other words, when you enable or disable CLI
paging from within the current configuration, it only affects that session. For new or existing sessions,
paging is enabled by default. This setting cannot be saved.
Example
The following command enables clipaging and does not allow the display to print continuously to the
screen:
enable clipaging
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
