Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
194
Example
The following command displays configured SNMP settings on the switch:
show management
The following is sample output from this command:
CLI idle timeout : Disabled
CLI max number of login attempts : 3
CLI max number of sessions : 8
CLI paging : Enabled (this session only)
CLI space-completion : Disabled (this session only)
CLI configuration logging : Disabled
Telnet access : Enabled (tcp port 23 vr all)
: Access Profile : not set
SSH access : Enabled (Key valid, tcp port 22 vr all)
: Access Profile : not set
SNMP access : Enabled
Total Read Only Communities : 1
Total Read Write Communities : 1
RMON : Disabled
SNMP Traps : Enabled
SNMP v1/v2c TrapReceivers : None
SNMP stats: InPkts 8619 OutPkts 8619 Errors 0 AuthErrors 0
Gets 8619 GetNexts 0 Sets 0
SNMP traps: Sent 0 AuthTraps Enabled
History
This command was first available in ExtremeWare XOS 10.1.
The trap receiver source IP address, SNMP counter statistics, SSH access, CLI logging, and SNMP access
states was added to the
show management
output in ExtremeWare XOS 11.0.
The enabled/disabled state for RMON was added to the
show management
output in ExtremeWare XOS
11.1.
Additional Telnet and SSH2 information about ACL usage was added to the
show management
output
in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
