create esrp
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1285
create esrp
create esrp <esrpDomain>
Description
Creates an ESRP domain with the specified name on the switch.
Syntax Description
Default
The ESRP domain is disabled and in the “Aware” state.
When you create an ESRP domain, it has the following default parameters:
●
Operational version—Extended
●
Priority—0
●
VLAN interface—none
●
VLAN tag—0
●
Hello timer—2 seconds
●
Neighbor timer—8 seconds
●
Premaster timer—6 seconds
●
Neutral timer—4 seconds
●
Neighbor restart timer—30 seconds
●
VLAN tracking—none
●
Ping tracking—none
●
IP route tracking—none
Usage Guidelines
The maximum length for a name is 32 characters. Names can contain alphanumeric characters and
underscores ( _ ) but cannot be any reserved keywords, for example, esrp. Names must start with an
alphabetical character, for example, a, Z.
Each ESRP domain name must be unique and cannot duplicate any other named ESRP domains on the
switch. If you are uncertain about the ESRP names on the switch, use the
show esrp
command to view
the ESRP domain names.
You can create a maximum of 128 ESRP domains.
Configuring ESRP-Aware Switches.
For an Extreme Networks switch to be ESRP-aware, you must create
an ESRP domain on the aware switch, add a master VLAN to that ESRP domain, add a member VLAN
to that ESRP domain if configured, and configure a domain ID if necessary.
esrpDomain
Specifies the name of an ESRP domain to be created. May be up to 32
characters in length.
