Commands for Status Monitoring and Statistics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
648
You can also use the following command to enable displaying the log on the console:
enable log display
The
enable log display
command is equivalent to the
enable log target console-display
command.
Modular Switches Only.
Note that the
backup-msm
target is only active on the primary MSM, and the
primary-msm
target is only active on the backup MSM.
Example
The following command enables log messages on the current session:
enable log target session
History
This command was first available in ExtremeWare XOS 10.1.
The
primary-msm
and
backup-msm
options were first available in ExtremeWare XOS 11.0.
The
ipPort
parameter was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
