Mindray Zonare ZS3, Service Manual

Page: 97 / 295

ZS3 Service Manual Page 97 of 295
DICOM storage commitment setting items are described as follows:
Name NOTE
Configure
new
service
Device
After you set the server (s) in DICOM Server Setting,
the name (s) will appear in the drop-down list, select the
name of the storage commitment server.
Service Name Default is server-SC, and it can be modified.
AE Title
Application Entity title. Here, it should be consistent with
that of the storage commitment server.
Port
DICOM communication port, 104 by default. Here, the
port should be consistent with that of the storage
commitment server port.
Maximum
Retries
Reserved feature.
Interval
Time(Sec)
Reserved feature.
Timeout (Sec)
Value: 5-60s, in increments of 5, and 15 by default.
After image storage commitment is sent, the system will
close the connection with the server.
Associated
Storage
Service The associated storage server is preset before storage
commitment, only after the exam is sent out, can
storage commitment be created.
Add Add the DICOM service to the service list.
Cancel Click to cancel the parameter setting.
Update
Select an item in the service list, change the
parameters in the above area, and click [Update] to
update the item in the service list.
Service
list
Delete Click to delete the selected service in the service list
Default Reserved feature.
Verify
Click to verify if the two DICOM application entities are
normally connected.
Exit Click to exit the screen.
NOTE:

Set the related server before performing the storage commitment service.

Save SCP port and the IP on SCP corresponds to the port and the IP on DICOM
preset page.