Mindray Zonare ZS3, Service Manual

Page: 94 / 295

ZS3 Service Manual Page 94 of 295
Name NOTE
Add
Click to add the Worklist service to the service
list.
Cancel Click to cancel the parameter setting.
Update
Select an item in the service list, change the
parameters in the above area, and click
[Update] to update the item in the service list.
Service list
Delete
Click to delete the selected service in the
service list.
Default server
Set the Worklist server as the default.
Select an item in the service list, click
[Default] and you can see “Y” in the Default
column.
Verify
Click to verify if the two DICOM application
entities are normally connected.
Exit Click to exit the screen.
MPPS PRESET
1. Select [Setup]

[DICOM]

[DICOM Service Setting]

[MPPS] to enter the MPPS
page.
2. Select the device name, and type the information about the AE title, the port.
3. Click [Add]. The entry will be added in the service list.
NOTE:
Set the MPPS service as the default when using the MPPS.