Lanier LP222cn, Operator'S Manual

Page: 430 / 536

Paper and Other Media
10
Thick Paper
Adhesive labels
OHP transparencies
Number of sheets that can
be set • Tray 1: 530
• Tray 2, Tray 3 (Paper Feed Unit Type 3000): 530
• Bypass Tray: 100
❒
Make sure paper is not stacked higher than the upper limit
mark (
T
) inside the tray. Make sure paper is not stacked higher
than the paper guides inside the bypass tray.
Both-side printing Possible
Paper thickness
105 - 199 g/m
2
(28 - 53 lb.)
• [ Thick Paper 1 ] : 105 - 165 g/m
2
(28 - 44 lb.)
• [ Thick Paper 2 ] : 165 - 199 g/m
2
(44 - 53 lb.)
Printer setup Press [ Paper Input ] menu, [ Paper Type ] and then [ Thick Paper 1 ] or
[ Thick Paper 2 ] on the control panel.
Printer driver setup Click [ Thick1 ] or [ Thick2 ] in the [ Type: ] list.
Enabled paper feeding tray Bypass Tray
• [ Thick Paper 1 ] : 30
• [ Thick Paper 2 ] : 10
❒
Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Both-side printing Not possible
Additional cautions • Print speed is slightly slower than when using plain paper.
Printer setup Press [ Paper Input ] menu, [ Paper Type ] , and then [ Labels ] on the
control panel.
Printer driver setup Click [ Labels ] in the [ Type: ] list.
Enabled paper feeding tray Bypass Tray: 50
❒
Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Both-sided printing Not possible
Additional cautions Print speed is slightly slower compared to plain paper.
Printer setup Press [ Paper Input ] menu, [ Paper Type ] , and then [ Transparency ] on
the control panel.