Lanier LP222cn, Operator'S Manual

Page: 172 / 536

Preparing for Printing
53
If the CD-ROM drive is D, the source files of USB Printing Support are stored
in the following location:
D:DRIVESUSBPRINTWIN98ME
I
Check the location, and then click [ Next ].
USB Printing Support is installed.
J
Click [ Finish ].
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the “USB001” port is added to the
[ Printers ]
window.
K
Click [ Next > ].
L
Click [ Search for the best driver for your device. {Recommended}. ], and then click
[ Next > ].
M
Select the [ Specify a location: ], check box, and then click [ Browse... ].
The [ Browse for Folder ] dialog box appears.
N
Insert the CD-ROM into the CD-ROM drive.
❒
When Auto Run starts, click [ Exit ] .
❒
To disable Auto Run, press the
{
Shift
}
key when inserting the CD-ROM into
the drive and keep it pressed until the computer finishes reading from the
CD-ROM.
O
Specify the location where the source files of the printer driver is stored,
and then click [
Next > ].
If the CD-ROM drive is D, the source files of the printer driver are stored in the
following location:
• RPCS
D:DRIVESRPCSWIN9X_ME(Language)DISK1
• PCL 5c
D:DRIVESPCL5cWIN9X_ME(Language)DISK1
• PCL 6
D:DRIVESPCL6WIN9X_ME(Language)DISK1
• PostScript 3
D:DRIVESPS3WIN98_ME(Language)DISK1
P
Check the location, and then click [ Next ].
Add Printer Wizard starts.
Q
Click [ Finish ].