Lanier LP222cn Operator'S Manual Download Page 417 | Manualshive

Page: 417 / 536

background image

Appendix

298

Information about Installed Applications

expat

Use of the software installed on this product, including the controller (hereinafter
“software”) and the expat Version 1.95.2 application software (hereinafter “expat
1.95.2”), is subject to the following conditions:

The product manufacturer provides warranty and support to the software of the
product including expat 1.95.2 and the product manufacturer allows the initial de-
veloper of expat 1.95.2 to be free from these obligations.

Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd

and Clark Cooper

Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the “Software”), to deal in the
Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to do so, subject to the
following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WAR-
RANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR-
POSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHER-
WISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFT-
WARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

❒

Information on expat 1.95.2 is available at:

http://expat.sourceforge.net/

JPEG LIBRARY

• The software installed on this product is based in part on the work of the In-

dependent JPEG Group.

NetBSD

Copyright Notice of NetBSD

For all users to use this product:

«
...
415
416
417
418
419
...
»

Summary of Contents for LP222cn

























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LP222cn

Brand: Xerox Pages: 11

Brand: Xerox Pages: 30

Versant 4100 Press

Brand: Xerox Pages: 68

Brand: Xerox Pages: 4

Brand: Xerox Pages: 4

Brand: Xerox Pages: 2

Versant 2100 Press

Brand: Xerox Pages: 68

Brand: Samsung Pages: 224

MF5750 - ImageCLASS B/W Laser

Brand: Canon Pages: 42

SCX 4500W - Personal Wireless Laser Multi-Function...

Brand: Samsung Pages: 113

imageRUNNER ADVANCE 8105

Brand: Canon Pages: 5

imageCLASS MF269dw

Brand: Canon Pages: 32

Brand: Samsung Pages: 158

Brand: Citizen Pages: 80

mobile pro advance

Brand: AM TECH Pages: 16

WORKCENTRE 5755

Brand: Xerox Pages: 356

Daisy Wheel 410

Brand: Radio Shack Pages: 140

FELIX Pro 3 Touch

Brand: Felix printers Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands