Lanier LP222cn, Operator'S Manual

Page: 464 / 536

Replacing Consumables and Maintenance Kit
44
Replacing the Fusing Unit
Replace the fusing unit when the following message appears on the display:
or
Check the contents of the box for the following items:
❖
Fusing Unit
• The inside of this machine gets very hot. Do not touch parts labelled
“
v
”(hot surface). Touching “
v
” labelled parts (hot surface) could result in
burns.
• The fusing unit gets very hot. When installing a new fusing unit, turn off the
printer and wait about 30 minutes. Then you can install the new fusing unit.
Handling the unit before it has fully cooled down (30 mins) could result in
burns.
• Do not pull out the fusing unit forcefully. Doing so may cause the unit to fall
and result in injury.
• Only the handle of the fusing unit is safe to touch. Touching other areas may
result in burns.
Replace Fusing
Unit soon
Replace
Fusing Unit