Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 964 / 2354

show ipv6 ospf interface OSPFv3 Commands
page 18-42 OmniSwitch CLI Reference Guide March 2011
show ipv6 ospf interface
Displays OSPFv3 interface information.
show ipv6 ospf interface [interface_name]
Syntax Definitions
interface_name The name of the interface.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Not specifying the interface name displays all known interfaces for the OSPFv3 router.
Examples
-> show ipv6 ospf interface
Admin Oper
Name DR Router ID BDR Router ID Status Status State
----------+----------------+---------------+----------+---------+---------
vlan-2071 5.5.5.5 0.0.0.0 Enabled Up DR
vlan-2055 7.7.7.7 5.5.5.5 Enabled Up BDR
vlan-2056 7.7.7.7 5.5.5.5 Enabled Up BDR
output definitions
Name The name of the interface.
DR Router ID The designated router address on this network segment. Make sure you
configure a VLAN for the router IP. (See
Chapter 4, “VLAN Manage-
ment Commands,” for more information.)
BDR Router ID The IP address of the backup designated router.
Vlan The VLAN to which the interface is assigned.
Admin Status The current administration status of the interface, either enabled or
disabled .
Oper Status Indicates whether the interface is an active OSPF interface.
State The current state of the OSPF interface. It will be DR, BDR, other.