Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 2341 / 2354

OmniSwitch CLI Reference Guide March 2011 page 13 DVMRP Commands
ipv6 multicast [vlan vid ] query-response-interval [ milliseconds ]
ipv6 multicast [vlan vid ] unsolicited-report-interval [ seconds ]
ipv6 multicast [vlan vid ] router-timeout [ seconds ]
ipv6 multicast [vlan vid ] source-timeout [ seconds ]
ipv6 multicast [vlan vid ] querying [{enable | disable}]
no ipv6 multicast [vlan vid ] querying
ipv6 multicast [vlan vid ] robustness [ robustness ]
ipv6 multicast [vlan vid ] spoofing [{enable | disable}]
no ipv6 multicast [vlan vid ] spoofing
ipv6 multicast [vlan vid ] zapping [{enable | disable}]
ipv6 multicast [vlan vid ] proxying [enable | disable]
show ip multicast [vlan vid ]
show ip multicast port [slot/ port ]
show ip multicast forward [ ip_address ]
show ip multicast neighbor
show ip multicast querier
show ip multicast group [
ip_address ]
show ip multicast source [ ip_address ]
show ip multicast tunnel [address]
show ipv6 multicast [vlan
vid ]
show ipv6 multicast port [slot/ port ]
show ipv6 multicast forward [ ipv6_ddress ]
show ipv6 multicast neighbor
show ipv6 multicast querier
show ipv6 multicast group [
ip_address ]
show ipv6 multicast source [ ip_address ]
show ipv6 multicast tunnel [ address ]
DVMRP Commands
ip load dvmrp
ip dvmrp admin-state {enable | disable}
ip dvmrp flash-interval
seconds
ip dvmrp graft-timeout seconds
ip dvmrp interface { interface_name }
no ip dvmrp interface { interface_name }
ip dvmrp interface { interface_name } metric value
ip dvmrp neighbor-interval seconds
ip dvmrp neighbor-timeout seconds
ip dvmrp prune-lifetime seconds
ip dvmrp prune-timeout seconds
ip dvmrp report-interval seconds
ip dvmrp route-holddown seconds
ip dvmrp route-timeout seconds
ip dvmrp subord-default {true | false}
ip interface
name tunnel [source ip_address ] [destination ip_address ] [protocol {ipip | gre}]
no ip dvmrp interface name
show ip dvmrp
show ip dvmrp interface [
ip_address | interface_name | enabled | disabled]
show ip dvmrp neighbor [ ip_address ]
show ip dvmrp nexthop [ ip_address ip_mask ]
show ip dvmrp prune [ group_address source_address source_mask ]
show ip dvmrp route [ ip_address ip_mask ]
show ip dvmrp tunnel [ local_address remote_address ]
PIM Commands
ip load pim
ip pim sparse admin-state {enable | disable}
ip pim dense admin-state {enable | disable}
ip pim static-rp
group_address/prefix_length rp_address [[no] override] [priority priority ]
ip pim rp-threshold bps
ip pim max-rps number
ip pim probe-time seconds
ip pim register checksum {header | full}
ip pim register-suppress-timeout
seconds
ip pim spt admin-state {enable | disable}
ip pim state-refresh-interval
seconds
ip pim state-refresh- limit ticks
ip pim state-refresh- ttl num
show ip pim sparse
show ip pim dense
show ip pim neighbor [
ip_address ]
show ip pim candidate-rp
show ip pim group-map [bsr | static-rp | ssm | dense]
show ip pim interface [
if_name ]
show ip pim static-rp
ipv6 pim sparse admin-state {enable | disable}
ipv6 pim static-rp
group_address/prefix_length rp_address [[no] override] [priority priority ]
ipv6 pim spt admin-state {enable | disable}
show ipv6 pim neighbor [
ipv6_address ] [ if_name ]
Multicast Routing Commands
ip mroute-boundary if_name scoped_address mask
no ip mroute-boundary if_name scoped_address mask
ip mroute interface if_ name ttl threshold
show ip mroute-boundary