Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 916 / 2354

show ip ospf interface OSPF Commands
page 17-82 OmniSwitch CLI Reference Guide March 2011
The following is an example of simple authentication (an interface name is used in this example):
-> show ip ospf interface vlan-3
Interface IP Name = vlan-3
VLAN Id = 3,
Interface IP Address = 100.10.10.2,
Interface IP Mask = 255.255.255.0,
Admin Status = Enabled,
Operational Status = Up,
OSPF Interface State = DR,
Interface Type = Broadcast,
Area Id = 0.0.0.2,
Designated Router IP Address = 100.10.10.2,
Designated Router RouterId = 192.169.1.2,
Backup Designated Router IP Address = 0.0.0.0,
Backup Designated Router RouterId = 0.0.0.0,
MTU (bytes) = 1500,
Metric Cost = 1,
Priority = 1,
Hello Interval (seconds) = 10,
Transit Delay (seconds) = 1,
Retrans Interval (seconds) = 5,
Dead Interval (seconds) = 40,
Poll Interval (seconds) = 120,
Link Type = Broadcast,
Authentication Type = simple,
Authentication Key = Set,
# of Events = 3,
# of Init State Neighbors = 0,
# of Exchange State Neighbors = 0,
# of 2-Way State Neighbors = 0,
# of Full State Neighbors = 0
Output fields when an interface name is specified are described below:
output definitions
Interface IP Name The name of the VLAN to which the interface is assigned.
VLAN Id The VLAN to which the interface is assigned.
Interface IP Address The IP address assigned to the interface.
Interface IP Mask The IP mask associated with the IP address assigned to the interface.
Admin Status The current administration status of the interface, either enabled or
disabled .
Operational Status Whether the interface is an active OSPF interface.
OSPF Interface State The current state of the OSPF interface. It will be down , up , dp , dr , or
other .
Interface Type The OSPF interface type, which can be Broadcast, NBMA, Point-to-
Point, or Point-to-Multipoint.
Area Id The area identification number to which the interface is assigned. This
field is not applicable if an interface has not yet been assigned to an
area.
Designated Router IP Address The designated router IP address.
Designated Router RouterId The identification number of the designated router.