Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 927 / 2354

OSPFv3 Commands ipv6 ospf host
OmniSwitch CLI Reference Guide March 2011 page 18-5
ipv6 ospf host
Creates or deletes an OSPFv3 entry for directly attached hosts.
ipv6 ospf host ipv6_address [area area_id] [metric metric]
no ipv6 ospf host ipv6_address area area_id
Syntax Definitions
ipv6_address The 128-bit IP address of the OSPF host.
area_id Area to which the host route belongs.
metric The cost metric value assigned to the specified host. The valid range is
0–65535.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of the command to remove the record of the OSPFv3 host.
•
Use this command when multiple paths exist to a host. The specified host must be directly attached to
the router. A metric value is the cost of all the hops necessary for a packet to reach its destination.
Routers use the metric to determine the best possible path.
•
This command allows you to modify the host parameter metric .
Examples
-> ipv6 ospf host 2001::1/64 metric 10
-> no ipv6 ospf host 2001::1/64 metric 10
Release History
Release 7.1.1; command was introduced.
Related Commands
parameter default
metric 0
show ipv6 ospf host Displays information on the configured OSPFv3 hosts.