Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 935 / 2354

OSPFv3 Commands ipv6 ospf area
OmniSwitch CLI Reference Guide March 2011 page 18-13
ipv6 ospf area
Assigns an OSPFv3 interface to a specified area.
ipv6 ospf area area_id [type {normal | stub [default-metric metric]}]
no ipv6 ospf area area_id
Syntax Definitions
area_id A unique 32-bit value in IPv4 address format.
normal Sets the area as a regular OSPFv3 area.
stub Configures an OSPFv3 area as a stub area.
metric Defines the metric to be used for default routes injected into the stub.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of the command to delete the OSPFv3 area.
•
The default-metric parameter defines the metric to be used for default routes injected into the stub
area.
Examples
-> ipv6 ospf area 0.0.0.1
-> ipv6 ospf area 0.0.0.1 stub
-> ipv6 ospf area 0.0.0.1 type normal
-> no ipv6 ospf area 0.0.0.1
Release History
Release 7.1.1; command was introduced.
Related Commands
parameter default
normal | stub normal
show ipv6 ospf area Displays either all the OSPFv6 areas, or a specified OSPFv6 area.