Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 737 / 2354

BFD Commands show ip bfd sessions
OmniSwitch CLI Reference Guide March 2011 page 14-29
show ip bfd sessions
Displays all the BFD sessions for the switch.
show ip bfd sessions [ session_num] [slot slot_num]
Syntax Definitions
num The BFD session number. Valid range is 1–1024.
slot The current slot position used by the switch.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show ip bfd sessions
Local Interface Neighbor State Remote Negotiated Negotiated Session
Discr Name Address Discr Rx Interval Tx Interval Type
------+-----------+-----------+------+-------+------------+------------+--------
1 one 100.1.1.10 UP 0 0 0 ECHO
2 one 101.1.1.11 UP 10 300 300 ASYNC
-> show ip bfd sessions slot 1
Local Interface Neighbor State Remote Negotiated Negotiated EchoRx
Discr Name Address Discr Rx Interval Tx Interval
------+----------+----------+------+-------+------------+------------+-------
1 one 100.1.1.10 UP 0 0 0 300
-> show ip bfd sessions 1
Local discriminator = 1,
Neighbor IP Address = 100.1.1.10,
Requested Session Type = ECHO,
Interface IP Address = 100.1.1.1,
Source UDP Port = 49152,
State = UP,
Session Operating Mode = ECHO only,
Remote discriminator = 0,
Negotiated Tx interval = 0,
Negotiated Rx interval = 0,
Echo Rx interval = 300,
Multiplier = 3,
Applications Registered: = STATIC-ROUTING