show ip slb clusters
Server Load Balancing Commands
page 20-36
OmniSwitch CLI Reference Guide
March 2011
-> show ip slb clusters statistics
Admin Operational
Cluster Name Status Status Count
-----------------------+--------+--------------------+--------
Cluster1 Enabled In Service 4 Servers
Cluster2 Enabled In Service 4 Servers
Dst IP 101.113.113.1/255.255.255.255
4503911
Src IP 202.202.1.0/255.255.255.0 6527831
Src Port 2/49
Release History
Release 7.1.1; command introduced.
Related Commands
output definitions
Cluster Name
The name of the SLB cluster. This field also contains the administrative
and operational status for the cluster and either the VIP address or QoS
policy condition value that identifies the cluster.
Admin Status
The administrative state of this physical server (
Enabled
or
Disabled)
.
Operational Status
The operational state of this server. The possible states are described as
follows:
•
Disabled
(this server is administratively disabled).
•
No Answer
(this server has not responded to ping requests).
•
Link Down
(there is a bad connection to this server).
•
In Service
(this server is used for SLB cluster client connections).
•
Discovery
(the SLB cluster is pinging this physical server).
•
Retrying
(the SLB cluster is making another attempt to bring up
this server).
Count
The total number of physical servers that belong to the cluster, and the
total number of packets serviced by the cluster.
Dst
The destination Virtual IP address assigned to the cluster.
Src
Source IP address assigned to the cluster.
Src Port
Source slot and port number of the SLB cluster.
ip slb reset statistics
Resets SLB statistics for all clusters.
show ip slb cluster
Displays detailed status and configuration information for a single SLB
cluster.
show ip slb servers
Displays the status of all physical servers belonging to each SLB cluster
on a switch.
show ip slb cluster server
Displays detailed status and configuration information for a single
physical server in an SLB cluster.
Summary of Contents for 060321-10, Rev. B
