Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 2055 / 2354

CMM Commands show running-directory
OmniSwitch CLI Reference Guide March 2011 page 37-17
show running-directory
Shows the current state of version and configuration management for a CMM.
show running-directory
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Once a switch boots up and is running, it runs either from the working, certified , or a user-defined
directory. If the switch is running from the certified directory, changes made to the RUNNING
CONFIGURATION using CLI commands, cannot be saved.
Examples
The following is an example of the display on OmniSwitch 10K switches:
-> show running-directory
CONFIGURATION STATUS
Running CMM : PRIMARY,
CMM Mode : MONO CMM,
Current CMM Slot : A,
Running configuration : CERTIFIED,
Certify/Restore Status : CERTIFIED,
SYNCHRONIZATION STATUS
Flash Between CMMs : SYNCHRONIZED
Running Configuration : SYNCHRONIZED
output definitions
Running CMM The CMM currently controlling the switch, either PRIMARY or
SECONDARY.
CMM Mode Whether there are one or two CMMs installed.
Current CMM Slot The slot of the primary CMM, A or B.
Running Configuration The current RUNNING DIRECTORY.
Certify/Restore Status Indicates if the CMM has been certified.