Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1691 / 2354

QoS Policy Commands policy condition multicast network group
OmniSwitch CLI Reference Guide March 2011 page 26-51
policy condition multicast network group
Associates a multicast group with a policy condition.
policy condition condition_name multicast network group multicast_group
policy condition condition_name no multicast network group
Syntax Definitions
condition_name The name of the condition.
multicast_group The multicast group name. Multicast groups are configured through the
policy network group command.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of the command to remove a multicast group from a condition; however, at least one
classification parameter must be associated with a condition.
•
A multicast address and a multicast network group cannot be specified in the same condition.
Examples
-> policy condition cond3 multicast group video2
Release History
Release 7.1.1; command was introduced.
Related Commands
qos apply Applies configured QoS and policy settings to the current configuration.
policy condition Creates a policy condition.
policy network group Configures a network group name and its associated IP addresses.
show policy condition Shows information about policy conditions configured on the switch.
show policy network group Displays information about policy network groups.