Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1613 / 2354

QoS Commands show qos port
OmniSwitch CLI Reference Guide March 2011 page 25-53
show qos port
Displays information about all QoS ports or a particular port.
show qos port [slot/port] [statistics]
Syntax Definitions
slot/port The physical slot and port number. For example: 3/1.
statistics Displays statistics for high-density gigabit modules.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Information for all ports is displayed unless a particular port is specified.
•
Use the qos port command to configure port parameters.
•
For ports that are trusted ( Yes displays in the Trust field), the Trust field includes one of the following
characters:
Examples
-> show qos port
Slot/ Default Default Bandwidth
Port Active Trust P/DSCP Classification Physical Ingress Egress Type
1/1 No No 0/ 0 DSCP 0K - - ethernet
1/2 Yes No 0/ 0 DSCP 1.00G - - ethernet-1G
1/3 No No 0/ 0 DSCP 0K - - ethernet
1/4 No No 0/ 0 DSCP 0K - - ethernet
1/5 No No 0/ 0 DSCP 0K - - ethernet
1/6 No No 0/ 0 DSCP 0K - - ethernet
1/7 No No 0/ 0 DSCP 0K - - ethernet
1/8 No No 0/ 0 DSCP 0K - - ethernet
1/9 No No 0/ 0 DSCP 0K - - ethernet
1/10 No No 0/ 0 DSCP 0K 50K - ethernet
1/11 No *Yes 0/ 0 *802.1P 0K - - ethernet
1/12 No *Yes 0/ 0 *802.1P 0K - - ethernet
character definition
+ Indicates that the port is manually configured as trusted through the qos
port trusted command; the port setting takes precedence over the global
trust setting configured through the qos trust ports command.
* Indicates that the port is automatically trusted regardless of the global set-
ting set through the
qos trust ports command. (Applies to mobile ports and
ports configured for 802.1Q.)