Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 461 / 2354

IP Commands ip route-map match ipv4-interface
OmniSwitch CLI Reference Guide March 2011 page 10-43
ip route-map match ipv4-interface
Matches the IPv4 interface name specified in the route map with the one that the routing protocol learned
the route on.
ip route-map route-map-name [sequence-number number] match ipv4-interface interface-name
no ip route-map route-map-name [sequence-number number] match ipv4-interface interface-name
Syntax Definitions
route-map-name The name of the route map.
number A number that links together the route maps. The range is 1–100.
interface-name Specifies the interface name of the outgoing interfaceof the route.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to delete the match ipv4-interface parameter in the route map.
•
All route maps having the same name but different sequence numbers are linked together and
processed in order of increasing sequence number.
•
The route-map-name and sequence-number must exist before you configure this match criteria.
Examples
-> ip route-map route1 sequence-number 10 match ipv4-interface int4
-> no ip route-map route1 sequence-number 10 match ipv4-interface int4
Release History
Release 7.1.1; command introduced
Related Commands
parameter default
number 50
ip route-map action Creates a route map for redistribution and sets the status of the route
map to permit or deny.
show ip route-map Displays the configured IP route maps.