Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 128 / 2354

vlan VLAN Management Commands
page 4-2 OmniSwitch CLI Reference Guide March 2011
vlan
Creates a new VLAN with the specified VLAN ID (VID) and an optional description.
vlan vlan_id [admin-state {enable | disable}] [name description]
no vlan vlan_id
Syntax Definitions
vlan_id A numeric value that uniquely identifies an individual VLAN. This
value becomes the VLAN ID for the new VLAN.
enable Enable VLAN administrative status.
disable Disable VLAN administrative status.
description An alphanumeric string. Optional name description for the VLAN ID.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to delete a VLAN from the configuration.
•
All VLAN ports and routers are detached before the VLAN is removed. If the VLAN deleted is a
default VLAN on the port, the port returns to default VLAN 1.
•
If the VLAN deleted is not a default VLAN, then the ports are directly detached from the VLAN.
•
A VLAN is not operationally active until at least one of the member ports of the VLAN is active and
can forward traffic.
•
Note that specifying multiple VLAN IDs and/or a range of VLAN IDs on the same command line is
allowed. Use a hyphen to indicate a contiguous range of VLAN ID entries (for example, vlan 10-15).
•
When a VLAN is administratively disabled, static port assignments are retained but traffic is not
forwarded from these ports.
•
The description can be any alphanumeric string. Enclose the description in double quotes if it contains
more than one word with space in between.
parameter default
enable | disable enable