Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 577 / 2354

IPv6 Commands ipv6 neighbor
OmniSwitch CLI Reference Guide March 2011 page 11-17
ipv6 neighbor
Configures a static entry in IPv6 Neighbor Table.
ipv6 neighbor ipv6_address hardware_address {if_name} {port slot/port|linkagg num }
no ipv6 neighbor ipv6_address {if_name}
Syntax Definitions
ipv6_address IPv6 address that corresponds to the hardware address.
hardware_address MAC address in hex format (e.g., 00:00:39:59:F1:0C).
if_name Name assigned to the interface on which the neighbor resides.
slot/port Slot/port used to reach the neighbor.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to remove an entry from IPv6 Neighbor Table.
Examples
-> ipv6 neighbor 4132:86::203 00:d0:c0:86:12:07 Test port 1/1
Release History
Release 7.1.1; command was introduced.
Related Commands
show ipv6 neighbors Displays IPv6 Neighbor Table.