Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 137 / 2354

VLAN Management Commands show vlan
OmniSwitch CLI Reference Guide March 2011 page 4-11
-> show vlan 1
Name : Finance IP,
Type : Static Vlan,
Administrative State : enabled,
Operational State : disabled,
IP Router Port : disabled,
IP MTU : 1500
Release History
Release 7.1.1; command introduced.
ip IP router interface status: Ena (IP interface exists for the VLAN) or Dis
(no IP router interface exists for the VLAN). Use the ip interface
command to define an IP router interface for a VLAN.
mtu Maximum Transmission Unit: Size of largest data packet that the
VLAN port can transmit. Configured through the
vlan mtu-ip com-
mand.
name The user-defined text description for the VLAN. By default, the VLAN
ID is displayed if the VLAN description is not specified. Configured
through the
vlan command.
output definitions
Name The user-defined text description for the VLAN. By default, the VLAN
ID is displayed if the VLAN description is not specified.
Type The type of VLAN ( MTP Vlan, IPC Vlan, Standard Vlan, VIP
Vlan )
Administrative State VLAN administrative status: enabled VLAN functions are enabled;
disabled specifies that VLAN functions are disabled. Use the vlan
command to change the VLAN administrative status.
Operational State VLAN operational status: Ena (enabled) or Dis (disabled). The
operational status remains disabled until an active port is assigned to
the VLAN. When the operational status is enabled, then VLAN
properties (for example router interfaces, Spanning Tree) are applied to
ports and traffic flow.
IP Router Port IP router port status: Ena (IP interface exists for the VLAN) or Dis (no
IP router interface exists for the VLAN). Use the ip interface
command to define an IP router interface for a VLAN.
IP MTU Maximum Transmission Unit: Size of largest data packet that the
VLAN port can transmit.
output definitions (continued)