Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1055 / 2354

BGP Commands ip bgp neighbor in-aspathlist
OmniSwitch CLI Reference Guide March 2011 page 19-87
ip bgp neighbor in-aspathlist
Assigns an inbound AS path list filter to a BGP peer.
ip bgp neighbor ip_address in-aspathlist {string | none}
Syntax Definitions
ip_address 32-bit IP address of the BGP peer.
string Inbound AS path list (0 to 70 characters). This name is case sensitive.
none Removes this AS path list from the peer.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The AS path list name (InboundASpath in the example below) is created using the ip bgp policy
aspath-list command. Any inbound routes from the BGP peer must match this AS path filter before
being accepted or passed to inbound policy.
•
To deassign an input AS path filter list, use this command to assign a value of none .
Examples
-> ip bgp neighbor 172.22.2.115 in-aspathlist InboundASpath
-> ip bgp neighbor 172.22.2.115 in-aspathlist none
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaBgpPeerTable
alaBgpPeerAspathListIn
ip bgp policy aspath-list Creates or removes an AS path list.