Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1509 / 2354

PIM Commands show ipv6 pim dense
OmniSwitch CLI Reference Guide March 2011 page 23-95
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaPimdmGlobalConfig
alaPimdmV6AdminStatus
alaPimKeepalivePeriod
alaPimRefreshInterval
alaPimdmStateRefreshLimitInterval
alaPimdmStateRefreshTimeToLive
output definitions
Status The current global (i.e., switch-wide) status of the IPv6 PIM dense
mode. Options include
enabled and disabled .
Source Lifetime The duration of the Keepalive or Source Lifetime timer. The default
value is 210.
State Refresh Interval The time-interval, in seconds, between successive State Refresh mes-
sages originated by the router. The default value is 60.
State Refresh Limit Interval Displays the limit at which a router will not forward the State Refresh
messages, if they are received at less than the interval. The default
value is 0.
State Refresh TTL Displays the TTL to be used in the router’s originated State Refresh
messages. The default value is 16.
ipv6 pim dense admin-state Enables or disables IPv6 PIM-DM (dense mode) globally on the
switch.
ip pim keepalive-period Configures the period during which the (S,G) Join state will be
maintained in the absence of (S,G) Join messages or explicit (S,G)
local membership.
ip pim state-refresh-interval Sets the interval between successive State Refresh messages origi-
nated by a router.
ip pim state-refresh-limit Sets the limit at which a router will not forward successive State
Refresh messages if they are received at less than the interval.
ip pim state-refresh-ttl Sets the Time to Live to be used in a router’s originated State
Refresh messages if the data packet’s Time to Live is not recorded.