Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 55 / 2354

Ethernet Port Commands interfaces link-trap
OmniSwitch CLI Reference Guide March 2011 page 1-19
interfaces link-trap
Enables trap link messages. If enabled, a trap is generated whenever the port changes state.
interfaces [slot | slot/port [-port2]] link-trap {enable|disable}
Syntax Definitions
slot Slot number you want to configure.
port Port number of the interface you want to configure.
port2 Last port number in a range of ports you want to configure.
enable Port link up/down traps are displayed on the NMS.
disable Port link up/down traps are not displayed on the NMS.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> interfaces 3/1 link-trap enable
-> interfaces 3 link-trap enable
-> interfaces 3/1-6 link-trap enable
Release History
Release 7.1.1; command introduced.
Related Commands
MIB Objects
esmConfigTable
esmPortSlot
esmPortIF
parameter default
enable | disable disable
show interfaces alias Displays interface line settings.