Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1835 / 2354

AAA Commands aaa -server
OmniSwitch CLI Reference Guide March 2011 page 28-5
aaa -server
Configures or modifies a server for Authenticated Switch Access.
aaa -server server [host {hostname | ip_address} {hostname2 | ip_address2}] [key secret]
[timeout seconds] [port port]
no aaa -server server
Syntax Definitions
server The name of the server.
hostname The host name (DNS name) of the primary server. The host
name or IP address is required when creating a server.
ip_address The IP address of the primary server. An IP address or host
name is required when creating a server.
hostname2 The host name (DNS name) of an optional backup server.
ip_address2 The IP address of an optional backup server.
secret The shared secret known to the switch and the server, but which is not
sent over the network. Can be any text or hexadecimal string but MUST
match the secret configured on the server. The secret is case-sensitive.
required when creating a server.
seconds The timeout for server replies to authentication requests.
port The port number for the primary server.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of the command to remove a server from the configuration. Only one
server may be deleted at a time.
•
A host name (or IP address) and a secret are required when configuring a server.
•
The server and the backup server must both be servers.
parameter default
seconds 2
port 49