Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1528 / 2354

show ipv6 pim cbsr PIM Commands
page 23-114 OmniSwitch CLI Reference Guide March 2011
show ipv6 pim cbsr
Displays the IPv6 Candidate-BSR information that is used in the Bootstrap messages.
show ipv6 pim cbsr
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show ipv6 pim cbsr
CBSR Address = 3000::7,
Status = enabled,
CBSR Priority = 0,
Hash Mask Length = 126,
Elected BSR = False,
Timer = 00h:00m:00s
Release History
Release 7.1.1; command was introduced.
output definitions
CBSR Address An IPv6 unicast address that the local router uses to advertise itself as a
Candidate-BSR.
Status The current status of this entry. The status is shown as enabled only if
the IPv6 PIM-SM is globally enabled and the IPv6 PIM interface is
enabled.
CBSR Priority The value for the local router as a Candidate-BSR. The higher the
value, the higher the priority.
Hash Mask Length The hash mask length that is advertised in the bootstrap messages (the
length of the mask is used in the hash function when computing the
Rendezvous Point (RP) for an IPv6 multicast group)
Elected BSR Specifies whether the local router is the elected BSR.
Timer The time value that is remaining before the local router originates the
next Bootstrap message. This value is zero if this router is not the
elected BSR.