Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 789 / 2354

VRRP Commands vrrp delay
OmniSwitch CLI Reference Guide March 2011 page 16-11
vrrp delay
Configures the amount of time allowed for routing tables to stabilize before virtual routers are started.
vrrp delay seconds
Syntax Definitions
seconds The amount of time after a reboot that virtual routers will wait before
they go active; the range is 0 to 180 seconds.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use this command to prevent loss of workstation connectivity before a virtual router becomes master.
Examples
-> vrrp delay 50
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaVRRPStartDelay
parameter default
seconds 45 seconds
vrrp Configures a new VRRP virtual router or modifies an existing one. Used
to enable or disable a virtual router.
show vrrp Displays the virtual router configuration for all virtual routers or for a
specific virtual router.