Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 768 / 2354

show ip helper DHCP Relay Commands
page 15-26 OmniSwitch CLI Reference Guide March 2011
show ip helper
Displays the current DHCP Relay and Relay Agent Information.
show ip helper
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Displays information for all IP addresses configured.
Examples
The following example shows the show ip helper command output:
-> show ip helper
Ip helper :
Forward Delay(seconds) = 300,
Max number of hops = 5,
Relay Agent Information = Enabled,
Relay Agent Information Policy = Keep,
PXE support = Enabled,
Forward option = standard mode,
Bootup Option = Disable,
Bootup Packet Option = DHCP
Forwarding address list (Standard mode):
128.100.16.1
output definitions
Forward Delay The current forward delay time (default is three seconds). Use the
ip helper forward-delay command to change this value.
Max number of hops The current maximum number of hops allowed (default is four
hops). Use the
ip helper maximum-hops command to change this
value.
Relay Agent Information Indicates the status ( Enabled or Disabled ) of the DHCP relay
agent information option feature. Configured through the ip helper
agent-information command.
Relay Agent Information Policy The policy configured to determine how the DHCP relay agent
handles the DHCP packets that already contain an Option-82 field.