Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 52 / 2354

interfaces ingress-bandwidth Ethernet Port Commands
page 1-16 OmniSwitch CLI Reference Guide March 2011
interfaces ingress-bandwidth
Configures the ingress bandwidth settings on a single port, a range of ports, or an entire Network Interface
(NI).
interfaces {slot| slot/port[-port2]} ingress-bandwidth {mbps| enable | disable}
Syntax Definitions
slot Slot number you want to configure.
port Port number of the interface you want to configure.
port2 Last port number in a range of ports you want to configure.
mbps Speciifies the ingress bandwidth in mpbs.
enable Enables ingress bandwidth limiting.
disable Disables ingress bnadwidth limiting.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> interfaces 3 ingress-bandwidth enable
-> interfaces 3 ingress-bandwidth mbps 30
Release History
Release 7.1.1; command introduced.
Related Commands
MIB Objects
parameter default
enable | disable disable
show interfaces ingress-rate-
limit Displays the ingress-rate-limit set for each interface por.