show ip slb servers
Server Load Balancing Commands
page 20-46
OmniSwitch CLI Reference Guide
March 2011
Release History
Release 7.1.1; command introduced.
Related Commands
MIB Objects
slbServers
slbServerIpAddress
slbServerClusterName
slbServerAdminStatus
slbServerOperStatus
slbServerFlows
Operational Status
The operational state of this server. The possible states are described as
follows:
•
Disabled
(this server is administratively disabled).
•
No Answer
(this server has not responded to ping requests).
•
Link Down
(there is a bad connection to this server).
•
In Service
(this server is used for SLB cluster client connections).
•
Discovery
(the SLB cluster is pinging this physical server).
•
Retrying
(the SLB cluster is making another attempt to bring up
this server).
% Avail
The percentage of time that this physical server has been available for
processing client requests. In other words, the actual ratio of up time
(
In Service
plus
Retrying
) versus down time (
No Answer
plus
Link
Down
). Please note that the
Disabled
and the initial
Discovery
states
are not counted as down time.
show ip slb cluster server
Displays the detailed status and configuration of a single physical server
in a Server Load Balancing cluster.
show ip slb clusters
Displays detailed status and configuration information for all Server
Load Balancing clusters on a switch.
show ip slb cluster
Displays detailed status and configuration information for a single
Server Load Balancing cluster.
output definitions (continued)
Summary of Contents for 060321-10, Rev. B
