Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 867 / 2354

OSPF Commands ip ospf interface dead-interval
OmniSwitch CLI Reference Guide March 2011 page 17-33
ip ospf interface dead-interval
Configures the OSPF interface dead interval.
ip ospf interface {interface_name} dead-interval seconds
Syntax Definitions
interface_name The name of the interface.
seconds The dead interval, in seconds. The valid range is 1–65535.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This is the interval, in seconds, after which a neighbor on this interface is considered dead if no hello
packets have been received from this neighbor.
•
This interval should be greater than the hello interval or the multiple of the hello interval.
Examples
-> ip ospf interface vlan-101 dead-interval 50
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
ospfIfTable
ospfIfRtrDeadInterval
parameter default
seconds
(broadcast and point-to-point)
40
seconds
(NBMA and point-to-multi-
point)
120
ip ospf interface hello-interval Configures the OSPF interface hello interval.
show ip ospf interface Displays the status and statistics of an OSPF interface.