CLI Change Guidelines
AOS Release 6 to AOS Release 7
OmniSwitch CLI Reference Guide
March 2011
page B-23
bridge cist {slot/port | logical_port} {restricted-role |
root-guard} {on | off | enable | disable}
spantree cist {port <slot/port1[-port2]> | linkagg
<linkagg1[-linkagg2]>} {restricted-role | root-
guard} {enable | disable}
bridge 1x1<vid> {slot/port | logical_port}
{restricted-role | root-guard} {on | off | enable | dis-
able}
spantree vlan <vid> {port <slot/port1[-port2]> |
linkagg <linkagg1[-linkagg2]>} {restricted-role |
root-guard} {enable | disable}
bridge cist {slot/port | logical_port} restricted-tcn
{on | off | enable | disable}
spantree cist {port <slot/port1[-port2]> | linkagg
<linkagg1[-linkagg2]>} restricted-tcn {enable |
disable}
bridge 1x1<vid> {slot/port | logical_port} restricted-
tcn {on | off | enable | disable}
spantree vlan <vid> {port <slot/port1[-port2]> |
linkagg <linkagg1[-linkagg2]>} restricted-tcn
{enable | disable}
bridge cist txholdcount value
spantree cist txholdcount value
bridge 1x1<vid> txholdcount {value}
spantree vlan <vid> txholdcount {value}
bridge port slot/port 10gig os8800optimized {enable
| disable}
removed
bridge rrstp
removed
no bridge rrstp
removed
bridge rrstp ring ring_id port1 {slot/port | linkagg
agg_num} port2 {slot/port | linkagg agg_num} vlan-
tag vlan_id [status {enable | disable}]
removed
no bridge rrstp ring [ring_id]
removed
bridge rrstp ring ring_id vlan-tag vid
removed
bridge rrstp ring ring_id status {enable | disable}
removed
show spantree <instance>
removed
show spantree 1x1 [vid]
show spantree [vlan <vid>]
show spantree <instance> ports [forwarding | block-
ing | active | configured]
removed
show spantree 1x1 [vid] ports [forwarding | blocking
| active | configured]
show spantree [vlan <vid>] ports [forwarding |
blocking | active | configured]
show spantree mst port {slot/port | logical_port}
show spantree mst {port <slot/port> | linkagg
<linkagg1[-linkagg2]>}
show bridge rrstp configuration
removed
show bridge rrstp ring [ring_id]
removed
show spantree map-msti
show spantree [vlan <vlan_id>] map-msti
bridge mode 1x1 pvst+ {enable | disable}
spantree pvst+compatibility {enable | disable}
bridge port {slot/port | agg_num} pvst+ {auto |
enable | disable}
spantree pvst+compatibility {port <slot/port> |
linkagg <linkagg1[-linkagg2]>} {enable | disable |
auto}
AOS Release 6
AOS Release 7
Summary of Contents for 060321-10, Rev. B
