Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1775 / 2354

QoS Policy Commands policy action 802.1p
OmniSwitch CLI Reference Guide March 2011 page 26-135
policy action 802.1p
Configures a value to be set in the 802.1p bits of the 802.1Q byte of an outgoing frame for traffic that
matches a policy with this action.
policy action action_name 802.1p 802.1p_value
policy action action_name no 802.1p
Syntax Definitions
action_name The name of the action.
802.1p_value The priority value to be set in 802.1Q frames. Values range from 0
(lowest priority) to 7 (highest priority).
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of the command to remove an 802.1p value from a policy action.
•
Note that specifying both ToS and DSCP in the same action is not allowed.
Examples
-> policy action action4 802.1p 7
-> policy action action4 no 802.1p
Release History
Release 7.1.1; command was introduced.
Related Commands
qos apply Applies configured QoS and policy settings to the current configuration.
policy action Creates a policy action.
show policy action Displays information about policy actions.