Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1207 / 2354

BGP Commands show ipv6 bgp neighbors timers
OmniSwitch CLI Reference Guide March 2011 page 19-239
show ipv6 bgp neighbors timers
Displays the timers for configured IPv6 BGP peers.
show ipv6 bgp neighbors timers [ipv6_address]
Syntax Definitions
ipv6_address The 128-bit IPv6 address.
Defaults
By default, the timer values for all the IPv6 BGP peers will be displayed.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the ipv6_address parameter to display the timer value for a specified IPv6 BGP peer.
Examples
-> show ipv6 bgp neighbors timers
Legends: Nbr = Neighbor
As = Autonomous System
RtAdv = Route Advertisement
Kalive = Keep Alive (actual)
Ka(C) = Configured Keep Alive
Nbr address As Hold Hold(C) RtAdv Retry Kalive Ka(C)
----------------------------------+-----+-----+-------+-----+-----+------+-----
2001:100:3:4::1 30 90 90 30 120 30 30
output definitions
Nbr address The IPv6 address for this BGP peer. Assign this address using the
ipv6 bgp neighbor command.
As The autonomous system to which this peer belongs. A peer’s AS num-
ber is assigned using the
ipv6 bgp neighbor remote-as command.
Hold The actual negotiated hold time value.
Hold (C) The hold time value. This value is configured using the ipv6 bgp
neighbor timers command.
RtAdv The route advertisement interval, in seconds, for updates between
external BGP peers.
Retry The interval, in seconds, between retries by this peer to set up a connec-
tion through TCP with another peer. This value is configured using the
ipv6 bgp neighbor timers command.