Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 995 / 2354

BGP Commands ip bgp log-neighbor-changes
OmniSwitch CLI Reference Guide March 2011 page 19-27
ip bgp log-neighbor-changes
Enables or disables the logging of peer state changes. If enabled, this logging tracks changes in the state of
BGP peers from ESTABLISHED to IDLE and from IDLE to ESTABLISHED. Viewing peer state logging
requires that certain debug parameters be set.
ip bgp log-neighbor-changes
no ip bgp log-neighbor-changes
Syntax Definitions
N/A
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The BGP protocol must be disabled (using the ip bgp admin-state command) before using this command.
Examples
-> ip bgp log-neighbor-changes
-> no ip bgp log-neighbor-changes
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaBgpGlobal
alaBgpPeerChanges
ip bgp admin-state Disables BGP within the router.