Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 140 / 2354

show vlan members VLAN Management Commands
page 4-14 OmniSwitch CLI Reference Guide March 2011
Examples
-> show vlan members
vlan port type status
+-----+-------+---------+------------+
1 1/1 default inactive
2 1/2 default blocking
11/4 qtagged forwarding
3 1/2 qtagged blocking
11/4 default forwarding
2/5 dynamic forwarding
-> show vlan 10 members
port type status
+------+--------+------------+
1/1 default forwarding
1/2 qtagged forwarding
-> show vlan members port 3/2
vlan type status
+------+---------+------------+
1 default forwarding
2 qtagged forwarding
5 dynamic blocking
3 qtagged blocking
-> show vlan 1-11 members port 1/3
type : default,
status : inactive,
vlan admin : enabled,
vlan oper : disabled,
output definitions
vlan Numerical VLAN ID. Identifies the VLAN assignment of the port.
port The slot number for the module and the physical port number on that
module (for example 3/1 specifies port 1 on slot 3).
type The type of VPA: default (configured default VLAN assignment for
the port), qtagged (802.1Q tagged secondary VLAN assignment for the
port), mirror (port is mirroring the VLAN assignment of another port),
dynamic ( configured dynamic VLAN assignment for the port).
status The VPA status: inactive (port is not active), forwarding (traffic is
forwarding on this VPA), blocking (traffic is not forwarding on this
VPA)
vlan admin VLAN administrative status: enabled enables VLAN functions to oper-
ate; disabled disables VLAN functions without deleting the VLAN.
Use the vlan command to change the VLAN administrative status.
vlan oper VLAN operational status: enabled or disabled . The
operational status remains disabled until an active port is assigned to
the VLAN. When the operational status is enabled, then VLAN
properties (for example router interfaces, Spanning Tree) are applied to
ports and traffic flow. A VLAN must have an enabled administrative
status before it can become operationally enabled.